COOL - Lite

A standard full vehicle window film installation (including rear windshield and front glass) typically takes between 2 to 3.5 hours depending on the car size and complexity of the curvature.

No. Unlike older metallic dyed films that block radio signals, Cool Guard Ceramic uses sputtered nano-ceramic materials. These materials are signal-neutral, ensuring perfect reception for mobile phones, navigation, and RFID readers.

Indian RTO rules state that front and rear windshields must have a minimum of 70% visible light transmission (VLT), and side windows must have 50% VLT. Cool Guard offers specific clear windshield lines and side window films that conform directly to these light transmission criteria.

No, if installed by an authorized Cool Guard technician. Bubbling is caused by cheap adhesives or poor prep. Cool Guard uses high-bond moisture-activated adhesives backed by our digital warranty, protecting against bubbling, peeling, or cracking.

Yes. If you wish to change the tint shade or remove it entirely, an authorized dealer can steam-remove the film without scratching the glass or damaging rear defogger lines. We recommend professional removal rather than home peeling.

Wait at least 48 hours for the adhesive to cure completely before rolling down the windows. When cleaning, use a clean microfiber cloth and a mild soap-water solution. Never use abrasive cleaners, squeegees with metal edges, or ammonia-based sprays.